Solar Charge MPPT Outback

outback mppt.png

Solar Charge Controller/Battery controll unit/battery controll regulator/battery charge MPPT

Solar Charge Controller adalah peralatan elektronik yang digunakan untuk mengatur arus searah yang diisi ke baterai dan diambil dari baterai ke beban. Solar charge controller mengatur overcharging (kelebihan pengisian - karena batere sudah penuh) dan kelebihan voltase dari panel surya. Kelebihan voltase dan pengisian akan mengurangi umur baterai.

Solar charge controller menerapkan teknologi Pulse Width Modulation (PWM) untuk mengatur fungsi pengisian baterai dan pembebasan arus dari baterai ke beban. Panel Surya 12 Volt umumnya memiliki tegangan output 16 - 21 Volt. Jadi tanpa solar charge controller, baterai akan rusak oleh over-charging dan ketidakstabilan tegangan. Baterai umumnya di-charge pada tegangan 14 - 14.7 Volt.

 Beberapa fungsi detail dari solar charge controller adalah sebagai berikut:

-Mengatur arus untuk pengisian ke baterai, menghindari overcharging, dan overvoltage.

-Mengatur arus yang dibebaskan/ diambil dari baterai agar baterai tidak full discharge, dan overloading.

-Monitoring temperatur baterai

 

Spesifikasi Solar Charge  MPPT Outback

Model FLEXmax 80 - FM80-150VDC FLEXmax 60 - FM60-150VDC
Nominal Battery Voltages  12, 24, 36, 48, or 60 VDC (Single model - selectable via field programming at start-up)  12, 24, 36, 48, or 60 VDC (Single model - selectable via field programming at start-up) 
Maximum Output Current  80A @ 104°F (40°C) with adjustable current limit  60A @ 104°F (40°C) with adjustable current limit
NEC Recommended Solar   12 VDC systems 1000 Watts / 24 VDC Systems 2000 Watts  12 VDC systems 750 Watts / 24 VDC Systems 1500 Watts
Maximum Array STC Nameplate  48 VDC systems 4000 Watts / 60 VDC Systems 5000 Watts  48 VDC systems 3000 Watts / 60 VDC Systems 3750 Watts
PV Open Circuit Voltage (VOC) 150 VDC absolute maximum coldest conditions / 145 VDC start-up and operating maximum 150 VDC absolute maximum coldest conditions / 145 VDC start-up and operating maximum
Standby Power Consumption Less than 1 Watt typical Less than 1 Watt typical
Power Conversion Efficiency 97.5% @ 80 Amps DC in a 48 VDC System - Typical  98.1% @ 60 Amps DC in a 48 VDC System - Typical
Charging Regulation Five Stages: Bulk, Absorption, Float, Silent and Equalization  Five Stages: Bulk, Absorption, Float, Silent and Equalization 
Voltage Regulation Set points  13 to 80 VDC user adjustable with password protection 13 to 80 VDC user adjustable with password protection
Equalization Charging  Programmable voltage setpoint and duration - automatic termination when completed Programmable voltage setpoint and duration - automatic termination when completed
Battery Temperature Compensation Automatic with optional RTS installed / 5.0 mV per °C per 2V battery cell Automatic with optional RTS installed / 5.0 mV per °C per 2V battery cell
Voltage Step-Down Capability Down convert from any acceptable array voltage to any battery voltage. Example: 72 VDC array to 24 VDC battery; 60 VDC array to 48 VDC batter Down convert from any acceptable array voltage to any battery voltage. Example: 72 VDC array to 24 VDC battery; 60 VDC array to 48 VDC batter
Programmable Auxiliary Control Output 12 VDC output signal which can be programmed for different control applications (maximum of 0.2 Amps DC) 12 VDC output signal which can be programmed for different control applications (maximum of 0.2 Amps DC)
Status Display 3.1” (8 cm) backlit LCD screen - 4 lines with 80 alphanumeric characters total 3.1” (8 cm) backlit LCD screen - 4 lines with 80 alphanumeric characters total
Remote Display and Controller Optional MATE3, MATE or MATE2 with RS232 Serial Communications Port Optional MATE3, MATE or MATE2 with RS232 Serial Communications Port
Network Cabling Proprietary network system using RJ-45 Modular Connectors with CAT5 Cable (8 wires) Proprietary network system using RJ-45 Modular Connectors with CAT5 Cable (8 wires)
Data Logging Last 128 days of operation: Amp Hours, Watt Hours, Time in Float, Peak Watts, Amps, Solar Array Voltage, Max. Battery Voltage, Min Battery Voltage and Absorb, Accumulated Amp Hours, and kW Hours of production Last 128 days of operation: Amp Hours, Watt Hours, Time in Float, Peak Watts, Amps, Solar Array Voltage, Max. Battery Voltage, Min Battery Voltage and Absorb, Accumulated Amp Hours, and kW Hours of production
Operating Temperature Range -40 to 60°C (power automatically derated above 40°C) -40 to 60°C (power automatically derated above 40°C)
Environmental Rating Indoor Type 1 Indoor Type 1
Conduit Knockouts One 1” (35 mm) on the back; One 1” (35 mm) on the left side; Two 1” (35 mm) on the bottom One 1” (35 mm) on the back; One 1” (35 mm) on the left side; Two 1” (35 mm) on the bottom
Warranty Standard 5 year / Available 10 Year Standard 5 year / Available 10 Year
Weight                                            Unit 12.20 lbs (5.56 kg) 11.65 lbs (5.3 kg)
Weight                                            Shipping 15.5 lbs (7.3 kg) 14.90 lbs (6.7 kg)
Dimensions (H x W x D)           Unit 16.25 x 5.75 x 4.5” (41.3 x 14.6 x 11.4 cm) 13.75 x 5.75 x 4.5” (35 x 14.6 x 11.4 cm)
Dimensions (H x W x D)           Unit 19 x 9.5 x 8.5” (48.3 x 24.1 x 21.6 cm) 17 x 9.5 x 8.5” (43.2 x 24.1 x 21.6 cm)
Options Remote Temperature Sensor (RTS), HUB4, HUB10, MATE, MATE2, MATE3 Remote Temperature Sensor (RTS), HUB4, HUB10, MATE, MATE2, MATE3
Menu Languages English & Spanish English & Spanish
Certifications ETL Listed to UL1741, CSA C22.2 No. 107.1 ETL Listed to UL1741, CSA C22.2 No. 107.1

 

For Information Call Marketing

handphone : +62812 20 400 100 Or +6221 799 0185

Email : [email protected]