Solar Charge MPPT Schneider

schneider mppt.png

Solar Charge Controller/Battery controll unit/battery controll regulator/battery charge MPPT

Solar Charge Controller adalah peralatan elektronik yang digunakan untuk mengatur arus searah yang diisi ke baterai dan diambil dari baterai ke beban. Solar charge controller mengatur overcharging (kelebihan pengisian - karena batere sudah penuh) dan kelebihan voltase dari panel surya. Kelebihan voltase dan pengisian akan mengurangi umur baterai.

Solar charge controller menerapkan teknologi Pulse Width Modulation (PWM) untuk mengatur fungsi pengisian baterai dan pembebasan arus dari baterai ke beban. Panel Surya 12 Volt umumnya memiliki tegangan output 16 - 21 Volt. Jadi tanpa solar charge controller, baterai akan rusak oleh over-charging dan ketidakstabilan tegangan. Baterai umumnya di-charge pada tegangan 14 - 14.7 Volt.

 Beberapa fungsi detail dari solar charge controller adalah sebagai berikut:

-Mengatur arus untuk pengisian ke baterai, menghindari overcharging, dan overvoltage.

-Mengatur arus yang dibebaskan/ diambil dari baterai agar baterai tidak full discharge, dan overloading.

-Monitoring temperatur baterai

 

Spesifikasi Solar Charge  MPPT Schneider

Device short name MPPT 60 150
Electrical specifications  
Nominal battery voltage 12, 24, 36, 48, 60 V
Battery voltage operating range  0 Vdc to 80 Vdc
PV array operating voltage  140 V
Max. PV array open circuit voltage  150 V including temperature correction factor
Max. array short-circuit current  60 A (48 A @ STC)
Max. charge current  60 A (for all battery voltages except 60 V)
Max. and min. wire size in conduit  #6 AWG to #14 AWG (10 to 2.5 mm²)
Max. output power  3500 W
Charger regulation method Three-stage (bulk, absorption, float) plus manual equalization Two-stage (bulk, absorption) plus manual equalization
Supported battery types  Flooded, GEL, AGM, Custom
Efficiency  
Max. power conversion efficiency 93% (nominal 12 V), 96% (nominal 24 V), 97% (nominal 36 V), 98% (nominal 48 V), 99% (nominal 60 V)
General specifications  
Power consumption, night time  2.5 W
Battery temperature sensor  Included
Auxiliary output  5 - 13 V, up to 200 mA
Enclosure material Indoor, ventilated, sheet metal chassis with 2.2 cm and 2.8 cm (7/8 in and 1 in) knockouts and aluminium heat-sink
IP degree of protection IP20
Product weight  4.8 kg (10.8 lb)
Shipping weight  8.0 kg (17.6 lb)
Product dimensions (H x W x D)  36.8 x 14.6 x 13.8 cm (14.5 × 5.8 × 5.5 in)
Shipping dimensions (H x W x D)  48.3 x 22.9 x 35 cm (19.0 × 9.0 × 9.8 in)
Device mounting  Vertical wall mount
Ambient air temperature for operation  -20°C to 45°C (-4°F to 113°F)
Storage temperature range -40°C to 85°C (-40°F to 185°F) full power, power derating above 45°C
Operating altitude  Sea level to 2000 m (6562 ft)
System network and remote monitoring  Available
Warranty  Five-year standard
Part number  865-1030-1
Features  
Display type  LCD, 2 lines 16 digits
Regulatory approval  
Safety  CSA Certified (UL1741, CSA 107.1) and CE Marked for the Low Voltage Directive (EN50178)
EMC  FCC and Industry Canada (Class B), CE Marked for the EMC Directive (EN61000-6-1, -6-3), C-Tick compliant

 

 

For Information Call Marketing

handphone : +62812 20 400 100 Or +6221 799 0185

Email : [email protected]